Sie sind nicht angemeldet.

Anmelden
Diese Seite kann nicht editiert werden.
 
 
 

esp-setup-app

Von $1

    Inhaltsverzeichnis
    zur älteren Version oder zurück zu versionshistorie.

    Kombinierter Revisionsvergleich

    Vergleich der Version vom 21:40, 29 Apr 2016 von admin mit der aktuellen Version modifiziert am 21:51, 29 Apr 2016 von stephan.
    no

    Requirements for a Setup Application for our IoT devices.content

    Requirements

    1. Provisioning: to connect the ESP8266 Module to the wifi network(Router) There are several options and we are checking 2 of them(UDP frames could be used here):
      1. Connecting to ESP8266 via AP mode(Access Point): App should then display a list of available Wifi networks available. The user should then choose his network and enter the password. The ESP8266 will then use the SSID and password and switch to Station mode to connect to the Wifi network
      2. Connecting to the ESP8266 using ESPtouch: An app is already provided from Espressif to connect the Esp8266 to the Wifi network and we could use the source code as a basis for our App with our own GUI
    2. The App should then display all our Wifi modules available(Each has its own IP). The user could then select any of the modules and configure it by selecting some options or entering some parameters(data will be sent here to the ESP8266 via TCP/IP or UDP Frames)
    3. OTA(Over The Air) Update(This is still in discussion and might be done directly from the ESP8266 without the App): To download files and send it to the Module for updating its software

    Version vom 21:40, 29 Apr 2016

    Diese Revision wurde von admin (Sperren) verändert
    no content

    Aktuelle Version

    Diese Revision wurde von stephan (Sperren) verändert

    Requirements for a Setup Application for our IoT devices.

    Requirements

    1. Provisioning: to connect the ESP8266 Module to the wifi network(Router) There are several options and we are checking 2 of them(UDP frames could be used here):
      1. Connecting to ESP8266 via AP mode(Access Point): App should then display a list of available Wifi networks available. The user should then choose his network and enter the password. The ESP8266 will then use the SSID and password and switch to Station mode to connect to the Wifi network
      2. Connecting to the ESP8266 using ESPtouch: An app is already provided from Espressif to connect the Esp8266 to the Wifi network and we could use the source code as a basis for our App with our own GUI
    2. The App should then display all our Wifi modules available(Each has its own IP). The user could then select any of the modules and configure it by selecting some options or entering some parameters(data will be sent here to the ESP8266 via TCP/IP or UDP Frames)
    3. OTA(Over The Air) Update(This is still in discussion and might be done directly from the ESP8266 without the App): To download files and send it to the Module for updating its software
     
    © Simple Solutions  •  Impressum  •  Wiki powered by Mindtouch