Sie sind nicht angemeldet.

Anmelden
Diese Seite kann nicht editiert werden.
 
 
 

Feature Report Protocol

Von $1

    Inhaltsverzeichnis
    Um zurückzugehen, müssen die aktuelle und die ältere Version mit Hilfe der Historie verglichen werden.

    Kombinierter Revisionsvergleich

    Vergleich der Version vom 19:02, 3 Mar 2015 von stephan mit der Version modifiziert am 19:40, 6 Mar 2015 von stephan.

    ...

    Address Content Value Length (Bytes) Remarks
    0 Command 32 1 CMD_SET_PORT
    1 NumPort 0...1 1 Number of onboard port 0=Port A, 1=Port B
    2 Values 0...0x000fffff0xfffff 4 Bitmask:
    Bit 0 = pin 0 of selected port, bit 19= pin 19 of selected port.
    Bit value 0=output low / bit value 1=output high
    6 Action 0=on
    1=off
    2= set
     1

    Selects how the port values are used:
    - On means that for each 1-bit in the port values mask a pin is being set to high and the others are not touched.
    - Off means that for each 1-bit in the port values mask a pin is being set to low and the others are not touched.
    - Set meand that all values are copied 1:1 to the ports. 1's become output highs and 0's become lows. No pins of the addressed port stay untouched.

    7...63 not used     Not used

    ...

    Version vom 19:02, 3 Mar 2015

    Diese Revision wurde von stephan (Sperren) verändert

    ...

    Address Content Value Length (Bytes) Remarks
    0 Command 32 1 CMD_SET_PORT
    1 NumPort 0...1 1 Number of onboard port 0=Port A, 1=Port B
    2 Values 0...0xfffff 4 Bitmask:
    Bit 0 = pin 0 of selected port, bit 19= pin 19 of selected port.
    Bit value 0=output low / bit value 1=output high
    6 Action 0=on
    1=off
    2= set
     

    Selects how the port values are used:
    - On means that for each 1-bit in the port values mask a pin is being set to high and the others are not touched.
    - Off means that for each 1-bit in the port values mask a pin is being set to low and the others are not touched.
    - Set meand that all values are copied 1:1 to the ports. 1's become output highs and 0's become lows. No pins of the addressed port stay untouched.

    7...63 not used     Not used

    ...

    Version seit 19:40, 6 Mar 2015

    Diese Revision wurde von stephan (Sperren) verändert

    ...

    Address Content Value Length (Bytes) Remarks
    0 Command 32 1 CMD_SET_PORT
    1 NumPort 0...1 1 Number of onboard port 0=Port A, 1=Port B
    2 Values 0...0x000fffff 4 Bitmask:
    Bit 0 = pin 0 of selected port, bit 19= pin 19 of selected port.
    Bit value 0=output low / bit value 1=output high
    6 Action 0=on
    1=off
    2= set
    1

    Selects how the port values are used:
    - On means that for each 1-bit in the port values mask a pin is being set to high and the others are not touched.
    - Off means that for each 1-bit in the port values mask a pin is being set to low and the others are not touched.
    - Set meand that all values are copied 1:1 to the ports. 1's become output highs and 0's become lows. No pins of the addressed port stay untouched.

    7...63 not used     Not used

    ...

     
    © Simple Solutions  •  Impressum  •  Wiki powered by Mindtouch